• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. K

    1835b Rear drive chain breaking

    Eh I'm going to file it down and see if it will last a few more years... If not I'll find replacement sprocket.
  2. K

    1835b Rear drive chain breaking

    Oh bummer found the issue! Rear sprocket is shot. Anyone have a good one for sale (Part # D88624)? Yes I know new is available but I'd prefer a good used one for less if I can find one for a reasonable price. Several teeth are chipped and one has a piece of metal protruding from the tooth that...
  3. K

    1835b Rear drive chain breaking

    Case does not make their own chains, so unless you know who manufacturers the chains for them I don't want to hear "use OEM", espeiclly since they also are continuous chains and there is no way I'm attempting to put one of those on the rear!! Mainly what I am asking is others experiences with...
  4. K

    1835b Rear drive chain breaking

    I just had a drive chain break on the skid steer, wasn't at high throttle but was pushing on a small tree like I do to push it over. Was in dirt, and it snapped. Bought a new PGN #60 heavy duty chain. Took hours to install due to the tight quarters; wife even had to help cause she could get...
  5. K

    Case 1835b Occasionally no drive

    One leak was just damaged fitting on a hose, easy fix. The other motor feels like the gasket is partly blown out the back of it. But it's not a major leak so for now going to let it be so I can get some other projects done. Thanks everyone who helped!
  6. K

    Case 1835b Occasionally no drive

    Crap I take it back, there are two more leaks... The sight glass was misleading as it is showing up to 1/4 on the glass when it's well below that cause fluid is getting caught in the edge of the glass :/ At least the motor shaft I resealed isn't leaking! One leak is a hose going to that same...
  7. K

    Case 1835b Occasionally no drive

    Good news I've worked it about 4hrs total and no leaks! It still however occasionally does the no drive thing... And fluid level is about 1/4 up the sight glass. Seems to only do this when it's good and hot after over 2hrs of constant work. Thoughts?
  8. K

    Case 1835b Occasionally no drive

    Well I got it all back together yesterday. No leaks so far but the real test will be when I staring really working it. All the seals fit perfect except the case seal which was too thick. I could have rigged it up on the lathe and turned it down to correct thickness, but I inspected the original...
  9. K

    Case 1835b Occasionally no drive

    Thank you! I've looked through it and see no reference of timing. Reassembly steps 10 to 14 cover that section and aside from lining up the hole I showed in picture from the coupling shaft and drive link nothing is said about the rotor set spline mesh. Oh well I'll just reassemble it and see...
  10. K

    Case 1835b Occasionally no drive

    For the remaining seals, some of them have been harder to find than others. Over all a lot of work finding good parts. The case seal has been the most difficult and I don't need it but I found something I think can work. All parts except bearing found at herculesus dot com. And even though I...
  11. K

    Case 1835b Occasionally no drive

    Thanks but not it. Here's an image of mine, (I need to clean it) and the tag says: TRW Ross gear div Code 114 84 Spec. MAE24053 A1 How big of a deal is this? Like if I get the thing off one tooth and it runs backwards, can I just put the hoses on backwards to make it go forward? If so then I...
  12. K

    Case 1835b Occasionally no drive

    Were you able to find the info? I've looked and looked and I can't figure out how the allignment matters though I'm sure it's because I don't understand something though.
  13. K

    Case 1835b Occasionally no drive

    I found an after source for the seal. So ya supplier prices are an outrageous rip off. A quality output shaft seal is Part number U12-1.25-25B from aftermarket suppliers for under $8 and is good up to 5000PSI. That was the one I was a little worried about, now the rest should be easy, will post...
  14. K

    Case 1835b Occasionally no drive

    So I sorta screwed up and didn't realize it until I had the hydraulic drive motor apart. In step 6 I put the bolts too far down and pulled the entire assembly out, so couldn't make alignment marks shown in step 7. Aside from that the parts all look great. The reassembly steps only show using...
  15. K

    Case 1835b Occasionally no drive

    It's maybe 20tho combined in both directions, but ya I figured I'd need to ensure internal bearings are good and determine why the play. I expect some play since there's the external bearing on the cap that holds the end of the shaft, so I'm not totally convinced that amount of play is bad, yet...
  16. K

    Case 1835b Occasionally no drive

    It was a little water but mostly oil mixed with hydraulic fluid. And the shaft on the motor has some play around the seal, enough that I can see it squeeze fluid out around the seal.
  17. K

    Case 1835b Occasionally no drive

    I don't see what you are referring to. The output shaft isn't available, but was available separately. In any event if I had to spend $619 on a seal kit I'd just buy a motor for $1350 and save myself the hassle. I got the motor out, was a bit of a pain. Time to get it apart...
  18. K

    Case 1835b Occasionally no drive

    Motor seal kit is $619 and output seal is $44? That's crazy pricing! Surely that seal is a standard off the shelf part from some seal maker that only costs $6 or $7 direct from them. It sure looks standard enough... Guess I'll take the motor apart, measure the sealing surfaces, and try to find a...
  19. K

    Case 1835b Occasionally no drive

    I propped it off the ground. After running a minute it started leaking out the chaincase and hydraulic level was down, so it's definitely the motor. Waiting on some AN12 male and female plugs to come in tomorrow and will get the motor out. I did pull off the cover and also one of the roller...
  20. K

    Case 1835b Occasionally no drive

    I don't store it where it will get rained on.
Top