• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    35D lost power on all functions (travel, digging, lifting)

    I hooked the 2 pump hoses on the main manifold and same problem :( . I capped and plugged all the other hoses from that block except the one that goes to the tank. I also have the switch unplugged, I don't know if that would cause a problem because the switch has 3 pins. The thumb is not moving...
  2. R

    35D lost power on all functions (travel, digging, lifting)

    Before I change the hydraulic pump, the 2 large hoses from the pump(1 and 2) are connected to a block with a solenoid below the pump along with other hoses. Then, 2 large hoses go to the valves manifold, Does anyone know what that block is for ? I can't find that in the manual. I know the seller...
  3. R

    Case 580 Replacement Fenders Ideas?

    The dealer told me the fenders were part of the cab. I sold the machine to a farmer.
  4. R

    35D lost power on all functions (travel, digging, lifting)

    I downloaded the manual from the Deere site. Tilted the cab, the vibrating sound is coming from the pump when lifting the boom but it is tracking much slower both speeds and both tracks than before.
  5. R

    35D lost power on all functions (travel, digging, lifting)

    Thank you, yes, John Deere, same machine I had a thumb problem with.
  6. R

    35D lost power on all functions (travel, digging, lifting)

    Could someone share with me where the main relief valve is ? I don't have the technical manual for this machine.
  7. R

    35D lost power on all functions (travel, digging, lifting)

    Hi all, serial no 265120, 6700 hours. It started being slower than before, it will barely lift the machine now and much slower on both tracks. I changed hydraulic filters and oil and same problem. There is some noise coming from behind under the cab but I am not sure where it is from. The swing...
  8. R

    Kubota 3990 DPF sensors testing

    Hi all, there are 3 sensors (2 wires plug each) on the DPF. One on each end and 1 in the middle. Is there a way to test theses using an ohmmeter ? Tks Richard
  9. R

    Toolcat 5600 has hydraulics but will not move

    More info. I changed the return and charge filters. Emptied the Hyd tank and filled with new HD-30 Oil. I opened the 2 filters, no debris. I backed it from the garage low-ilde and tried going forward and it moves slowly, somekind of slipping sound. I noticed when I release the gas pedal, the...
  10. R

    Toolcat 5600 has hydraulics but will not move

    A bit more info, I started the machine to get it off the trailer. It idled for about 10 mins and another fan kicked up in the rear. I supposed this is the one FW-Cowboy mentioned ?! Cold It does move but as the TC gets warmer it starts to kind of slip, then I increase the throttle and then it...
  11. R

    Toolcat 5600 has hydraulics but will not move

    I have steering, not sure about the hydraulic fan but I will check today.
  12. R

    Toolcat 5600 has hydraulics but will not move

    no codes !
  13. R

    Toolcat 5600 has hydraulics but will not move

    More info on the problem. When the machine is cold, it will move somewhat forward/reverse but it feels something is slipping. When it gets warmer, I have to increase the throttle to get it to move. There is a weird sound coming from the front right. Eventually when the machine is a lot warmer...
  14. R

    Toolcat 5600 has hydraulics but will not move

    I have a 2018 TC 5600 (2,100 hours). I broke one of the hydraulic lines beside the right front wheel while moving snow in January. The line feeds the front equipment. The 5600 sat for about one month as we have another machine. We fixed the hose, re-topped the hydraulic oil and the 5600 was up &...
  15. R

    CASE 580 SM2-2007

    This problem appeared after I moved 6,000 pounds road ciment blocks and the machine had problems lifting them, I used the bucket curl-up and lots of throttle to accomplish it. I will change the hoses. Thank you for the reply.
  16. R

    CASE 580 SM2-2007

    Hi all, I have an interesting problem for me. My front bucket curl up is very slow, curl down is fast, front fork lifts up normal. All the back-end is normal. The machine has 5,200 hours. I got it at 4,400 hours in 2016. When I bought it, the speed of the bucket curl-up was way faster than now...
  17. R

    Takeuchi TB280FR 2020 3RD light meaning

    Thank you.
  18. R

    Takeuchi TB280FR 2020 3RD light meaning

    Hello all, I am looking to buy a used 2020 TB280FR. There is this light 3RD on the display. Does anyone know what is the meaning of that light ? I don't have the manual but will buy it if I proceed with this.
  19. R

    JD 35D A/C control blinking

    Red, yellow, white/green and red/black. The machine was bought in Quebec, I'm the 2nd owner. I will inquire about that switch with the seller. The connector I disconnected would be the A/C torque control solenoid according to our previous thread discussion my thumb issue. When I tested the...
  20. R

    JD 35D A/C control blinking

    I have an update on this. A few weeks ago, I was working on the thumb not working and found a burnt connector on a solenoid near the hydraulic pump. I fixed the connector but that did not fix my thumb issue. I finally got the thumb working by turning ON the aux flow switch (last one on the...
Top