• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    JD 35D A/C control blinking

    Hi, finally got my hands back on the machine today. I checked the ground cabin and yes it is under on the left side. (photo attached) I checked a couple of bolts inside the cabin for continuity and were fine. I also jumped the battery negative to the cabin ground bolt and still had the same...
  2. R

    JD 35D A/C control blinking

    I can PM it if you give me your email.
  3. R

    JD 35D A/C control blinking

    I'll lift up the Cab and check again... The blinking stops when I repress the A/C button again to turn OFF the A/C and then all the other functions work on HVAC control (fan speed, hot / Cool) etc... but when blinking (AC = ON) , any button I press have no effect. I should have the video of the...
  4. R

    JD 35D A/C control blinking

    Hello, my 35D started acting up this week-end with the A/C not working. It was working fine before. When I press the A/C ON button, the board starts blinking and I hear a ticking sound coming from one of the relays under the panel below the seat. Serial is 265120. I am not 100% sure which relay...
  5. R

    CAT 308C CR stick cylinder failure and question

    That's what I told the hydraulic person but he told me that was not possible ?! The other question is were there 2 snap rings before and if so, where is the 2nd one ? He already told me to look in the hydraulic tank for the small broken piece of the one we see on the picture. I suppose I should...
  6. R

    CAT 308C CR stick cylinder failure and question

    Hi all, serial is KCX00519. The stick cylinder started not holding pressure and was coming down when joystick was in neutral. After dismantling, see pictures attached, part of the snap ring between the cushion and the nut holding the piston was gone. The hydraulic shop told me it broke and...
  7. R

    JD 35D 2010 thumb stopped working ser 2651xx

    Well in my case when the switch is off the thumb is not working. So I suppose there is some wiring issue in that area. I'll go re-investigate this. Thank you again.
  8. R

    JD 35D 2010 thumb stopped working ser 2651xx

    so when that switch if OFF, the thumb should be working right ?
  9. R

    JD 35D 2010 thumb stopped working ser 2651xx

    How is it activated ? by a switch in the Cab ? and thanks again for the schematic.
  10. R

    JD 35D 2010 thumb stopped working ser 2651xx

    Here is the serial number.
  11. R

    JD 35D 2010 thumb stopped working ser 2651xx

    When I spoke with JD, they traced it to below. https://partscatalog.deere.com/jdrc/sidebyside/equipment/142050/referrer/search/pgId/109768037/partnumber/4614657/callout/14
  12. R

    JD 35D 2010 thumb stopped working ser 2651xx

    I got the thumb working, it had to do with another switch in the cab, that either was replaced or added by the previous original owner. I'll check with him when I see him. Thanks a whole lot for the additional info you provided. As for the solenoid valve, I don't know what it is for ? I turned...
  13. R

    JD 35D 2010 thumb stopped working ser 2651xx

    Here is a picture of the control valve where the solenoid magnet was mounted to. I don't have 12V there even when I turn on AC but the AC fuse is OK. I took out the electric magnet, fixed the connector issue but did not change anything. I tested when the cab was up.
  14. R

    JD 35D 2010 thumb stopped working ser 2651xx

    Yes on that side of the box ! but not the blue wire
  15. R

    JD 35D 2010 thumb stopped working ser 2651xx

    This is what I have, below, the kind of red wire beside the black on the top of the picture should have 12V ? the F8 fuse is OK. SER is 265120
  16. R

    JD 35D 2010 thumb stopped working ser 2651xx

    Sorry for post no 39, The part no is 4614657. The electro magnet is not sold separately.
  17. R

    JD 35D 2010 thumb stopped working ser 2651xx

    After the previous post, I talked to the JD parts guy, he tells me I need 460$ cnd. Anyone knows what resistance the electric part should show ?
  18. R

    JD 35D 2010 thumb stopped working ser 2651xx

    the other question I have is, when is 12V is supposed to be on the male connector (from the wiring harness), when the left lever is brought down ?
  19. R

    JD 35D 2010 thumb stopped working ser 2651xx

    I got my hands on the machine. I tested the black wire from the little box and frame bolt and got continuity. Check the kind of red (more orange to me) beside the black wire and got .15V, decided to lift up the cab looking for ?!, found a connector wire that goes to a solenoid beside the pump...
  20. R

    JD 35D 2010 thumb stopped working ser 2651xx

    Yes the little box is part of the handle, I will go check the wires with a meter. Thanks a lot for the info.
Top