• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    MQ 70kva DCA-70 with a JD engine, error code 3673 007 followed by 1569 031 derate condition exists

    When the msg appeared while running I manually moved the actuator linkage easely. If I was to test the actuator motor, what voltage should I apply to pin 1 and 2 then ?
  2. R

    MQ 70kva DCA-70 with a JD engine, error code 3673 007 followed by 1569 031 derate condition exists

    I disconnected the 4 wire plug and started the machine and got error messages right away so there is some connection in the top of the valve. I reconnected the plug and restarted the machine. After .1 hour (temperature gauge was around 140F) the 3673 007 msg appeared but the valve mechanism...
  3. R

    MQ 70kva DCA-70 with a JD engine, error code 3673 007 followed by 1569 031 derate condition exists

    The linkage moves freely both ways. There is a 4 wires plug connected to the top of valve. Should I be testing resistance or voltage next ? the plug is numbered 1 to 4.
  4. R

    MQ 70kva DCA-70 with a JD engine, error code 3673 007 followed by 1569 031 derate condition exists

    Engine serial is PE4045R047339. The PDF document says it has to do with the exhaust throttle valve. I can move it freely. So I am wondering what I should test next ? ! Any one has an idea ? It ran for about 12 hours non stop with very little load when this msg appeared on the DM1 display. I...
  5. R

    JD 650k xlt exhaust throttle codes

    I'd like to but I can't find the way to post a new thread. Engine serial is PE4045R047339.
  6. R

    Case 580 Super M, hydraulic switch

    The problem was the 5 pins relay. It sits under the cabin where dirt and snow gets to. Problem solved.
  7. R

    JD 650k xlt exhaust throttle codes

    Hello, I have a generator from Mulitiquip with a JD 4045 engine with 4,500 hours. This winter on a 14 hours power outage, it ran with very little load on I got 1569.006 derate condition exist. Now after 5-10 mins of running I get the same message. In the DM1 menu I have 3673 007 006 unknown spn...
  8. R

    Case 580 Super M, hydraulic switch

    Thank you for the info. Maybe I should have started a different thread but my problem started with the same above mentionned. First in cold weather I noticed pushing and releasing the switch in the third position would not engage the pilot controls. After warming up it would eventually engage...
  9. R

    Case 580 Super M, hydraulic switch

    I replaced the rocker switch with a new one and the problem still occurs.
  10. R

    Case 580 Super M, hydraulic switch

    I have the same problem with a CASE 580 SM 2. If I push & hold the switch the light comes on and the backhoe functions work. As soon as I let go, the light turns off and the hydraulic stops working. Is the switch the problem or the relay ?
  11. R

    2004 308C CR alternator access

    KCX00519, I am reading the same schematic you posted before (282 & up)
  12. R

    2004 308C CR alternator access

    Hi all, just bought an old 308C and I have a couple of problems with it. One problem is, the battery light stays "on" all the time and the service meter is not turning. I know the alternator is charging as I have 28 volts on the voltmeter when touching the + on the 1st battery and the - post and...
Top