• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by farmmaterialmover

  1. F

    2013 DOOSAN G25P-5 with gm 2.4L on propane, no spark

    Bought a dead in water forklift. Anyone real familiar with these engines and common reasons it wouldn't have spark?
  2. F

    volvo ec210cl thumb quit working correctly

    The thumb has been working correctly but then quit while running it. It will now squeeze somewhat, but it will not raise up out of the way on its own. If you turn the thumb off, it will settle to the squeeze position almost immediately. I know the thumb circuit is somewhat complex on these...
  3. F

    Volvo EC210CL They sent wrong injectors. What is difference between labeled 'A' and 'B'

    the correct injectors fixed the problem, thanks
  4. F

    Volvo EC210CL They sent wrong injectors. What is difference between labeled 'A' and 'B'

    Thank you so much Lachau! I have searched till blue in the face and never found the info you just shared. We ordered the correct injectors but didn't make sure of the number they sent us. The excavator starts up nice and sounds good, but after a couple minutes it will fog white diesel smelling...
  5. F

    Volvo EC210CL They sent wrong injectors. What is difference between labeled 'A' and 'B'

    We ordered 04290987 067 injectors which should have a big 'A' stamped on them. They instead sent us 04290986 067 injectors that has a large 'B' stamped on them. What does the A and B signify?
  6. F

    ec210cl injector crush washers

    Thanks. I found that the washers or seals I had were not correct.
  7. F

    ec210cl injector crush washers

    The injectors have many different applications. Do the injectors need specific crush washers for each application or is the crush washer provided with the injector universal to all it's applications?
  8. F

    2008 volvo ec210cl runs great for 10 minutes then derates

    I got past the v-ecu 'no communication' for now. No yellow warning anymore. So, I can run it in auto mode for about 10 minutes digging and traveling, but then the red warning comes up to say shut down because of engine error. It derates 30 seconds or so later. It has to be left to cool...
  9. F

    Volvo EW160B (2001) – Electrical / Electronic issue when cold

    Another guy on here had relays clicking and replaced the relay that was causing it. So switching relays around to find the offender might be possible.
  10. F

    Bobcat E35 E000651-31

    I would give the injector cleaner a try. Also closely inspect the wiring which you probably already have. I wouldn't run it long if you have any symptoms like puffing smoke during an surge as you don't want to damage anything deeper. One positive is the code is pretty specific. Some codes can be...
  11. F

    volvo ec210cl gives red shutdown warning only at low idle

    This may not warrant a second thread, but I have a different main question. If this is bad manners on this forum, let me know. The above excavator asks us in red letters to shut it down in low idle but not at higher idle over 1700 rpm. The only code is a psid 209-09 communication but doesn't...
  12. F

    volvo ec210cl throttle dial won't work in manual. Code psid 201 09

    Ok, thank you. I will follow up and trace those wires. In the mean time, I understand more about the machine. I understand more about what manual mode means. The reason it starts all the time in manual is it isn't recognizing much of anything...like the lever you pull up once seated in the cab...
  13. F

    volvo ec210cl throttle dial won't work in manual. Code psid 201 09

    I might also say that the auto idle works great, both idling down when not using and idles up when use a joystick. When it idles down though, the yellow or red warning happens pretty quickly.
  14. F

    volvo ec210cl throttle dial won't work in manual. Code psid 201 09

    My volvo ec 210cl will not throttle up in manual mode. If you quickly switch it to auto mode and turn idle up over 1700 rpms it will usually idle almost indefinitely. But if you put it under load it will give you the red engine malfunction shut down screen and derate rpms. If you don't start...
  15. F

    Genie 5519 Joystick Pattern Change?

    I have a 2014 2506 (european 5519) that I just got that has boom extend on the left slider button and tilt of forks is left/right and I want boom extend left and right and fork tilt on the slider thumb button because that it how our other telehandlers are set up. I wouldn't like the thumb button...
See more
Top