• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Need help again 325 bobcat mini ex

rainman

Member
Joined
Dec 20, 2015
Messages
22
Location
niota tn
Went to start it and it would turn over but not start
So I tried a little starting fluid and it stand rain fine till I put the lever down and it died immediately
Wouldn't start so I tested the batty it showed a good charge and the charging system should but when I load tested it the bay showed bad
So the next step I did was took the battery off and before I put the chayon it I load test it again and the battery showed good
I have checked the fuses and they are good don't know how to check the relays so I'm just gonna change them around if that don't work then I don't know else to do
Any suggestions would be greatly appreciated
 

ps66x4

Senior Member
Joined
Nov 10, 2013
Messages
295
Location
CT
Occupation
cement mason
Make sure your fuel line isn't sucking air. I have a Bobcat 313, wouldn't start so I put a bottle up high and gravity feed it found out I had a crack in the fuel line and the electric fuel pump didn't work. Runs good now.
 

rainman

Member
Joined
Dec 20, 2015
Messages
22
Location
niota tn
after I got home I put the battery back on and tighten the cables then I load tested a it showed good
Then I switched the relays around to no avail
Then I tied the kill switch back and it would run out the lever down and it stayed running but the problem now is that I had no hydraulic power moved all levers and nothing happened
And I think it had a code 83-15 on it which I'm gonna try to find
And thanks for the reply
I'm not very good at reading wiring diagram
I'm wrong bout the code it is 3-15 and it's not in my manual
 
Top