• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Genie Z-45/25 function issues from platform (schematics needed)

M

Midnightmoon

Senior Member
Joined
Nov 9, 2013
Messages
453
Location
Ny
Hello,

Looking for some help mainly looking for service manual with schematics before I pay Genie's high prices.

genie
model Z-45/25
sn# Z4525-20880
year 2002
electrical schematic# E0253

My issue is all functions from the lower controls are working fine but from the upper platform only some functions work.

Sometimes everything works fine other times only up down and switches function. Rotate and drive wont work.

Odd thing is these functions work without pressing the foot pedal.

When the foot pedal is pressed it activates the relay under the controls and sends 12 volts to the relay but all other posts on the relay doesn't have 12 volts.

i'm swapping out the relay today but need to rule out the main board that sends voltage to the control valve.

All the electrical looks to be original and nothing has been bypassed under the platform controls.

There are some wires that have been repaired with electrical tape in the boom cat track which I will be investigating today along with swapping out the relay.

Has anyone had similar issues?

Hoping to find a service manual but will buy one if needed.

Thanks for the help.
 
You must log in or register to reply here.
Top