Deere front hub seal replacement

[Columbo]

Any chance someone could send me the Deere service manual procedure for replacing the front axle hub seals and bearings in a Deere 3150 tractor (s/n L03150U587073)? Maybe @mg2361 or @Diesel Dave would have access to this info? Thanks in advance!

 

[Diesel Dave]

@Columbo ,Nothing here for that ZF mfwd .

 

[Columbo]

@Columbo ,Nothing here for that ZF mfwd .

Thanks for checking!

 

[Columbo]

Any chance there is an exploded parts diagram for that hub assembly?

 

[Diesel Dave]

Any chance there is an exploded parts diagram for that hub assembly?

I assume you have the North America edition.
.
https://partscatalog.deere.com/jdrc/sidebyside/equipment/8173/referrer/navigation/pgId/2638586 .
and,
https://partscatalog.deere.com/jdrc/sidebyside/equipment/8173/referrer/navigation/pgId/2097726 .

 

[Columbo]

Thank you! I’m pretty good at SIS but still learning where to find the Deere parts stuff.

 

[mg2361]

Attach a picture of the hub without the wheel on it (front and back of hub) and a picture of the axle serial number, if it is still on there.

Does your machine have front multidisck brakes?

Meanwhile, I'll look at what I have that is close. I have no access to AG manuals, but the ZF axle hub should be the same.

Check your messages in a bit.

 

[Columbo]

Attach a picture of the hub without the wheel on it (front and back of hub) and a picture of the axle serial number, if it is still on there.

Does your machine have front multidisck brakes?

Meanwhile, I'll look at what I have that is close. I have no access to AG manuals, but the ZF axle hub should be the same.

Check your messages in a bit.

Will do, it’s at my brothers farm but I’ll get him to take some pics or I’ll get over there for pictures ASAP.

 

[Columbo]

Attach a picture of the hub without the wheel on it (front and back of hub) and a picture of the axle serial number, if it is still on there.

Does your machine have front multidisck brakes?

Meanwhile, I'll look at what I have that is close. I have no access to AG manuals, but the ZF axle hub should be the same.

Check your messages in a bit.

Got the messages, it wouldn’t let me respond in the conversation but thank you very much! I’m pretty sure the axle does not have brakes, but I’ll double check.