D9H head replacement

[Robert Dickens]

Im new to site.
Looking for cylinder head torque sequence and torque specs for D9H with a D353 engine.
Any help in pointing in the right direction would be appreciated.
Thanks

 

[Dave Neubert]

make sure you put the front head on the front and the back on the rear there is a pipe plug that plugs the passage for lubing thr rocker arms don't ask how I know 180 first then 300

 

[Robert Dickens]

Thanks Dave. Just doing front head. Had a crack in the head on #2 cylinder, where injector threads in. Was getting coolant in the exhaust

 

[Robert Dickens]

Would you have torque sequence too

 

[Tinkerer]

Welcome to HEF, Robert !

 

[Nige]

Would you have torque sequence too

Sequence depends on whether you have earlier or later heads. Both are shown below.

Earlier head


Later head

 

[Robert Dickens]

Thats great. I have the later head.
Appreciate the info.
Thanks

 

[chidog]

The push rod side is down. Starting at the top. From left to right.
Row 1,) 18, 19, 12 10, 15, 14
Row 2,) 6, 4, 1, 7
Row 3,) 8, 2, 3, 5
Row 4,) 20, 17, 9, 11, 13, 16
Push rod lifter area down here.


Guess I was too slow.

 

[Old Magnet]

For the spacer plate engine....

 

[Robert Dickens]

Thats perfect. Thanks. Be able to get this old girl prrring again

 

[Robert Dickens]

Welcome to HEF, Robert !

Thanks