hill grader
New Member
Hi all,I'm new to the forum .i would like to say i have imported a 726a 3 from the states to wales uk it had done 5000 hrs ex goverment .It was taken apart then put in a 40 ft container and shipped over (i have never done this before,my nerves were a jangling) but it turned up and 3 of us got to work puting it together which took one and a half days.
It started first time (cummings) and everything looked good.the only thing not working was the front wheel drive (oh Sh** !!) ,we needed to get the machine to work so went off grading all was fine ,we were still trying to sort out the problem,yippee it was the switch on the brakes that had gone so would not turn the front drive on it took us a while to get the wireing diagrames but at leased we are now sorted the part cost £120 ouch .
anyhow great machine love it,ihope it is reliable . Can anyone tell me what to look out for on the machine as in its weak spots.
Thanks all great forum ,i will post some pics when allowed .
It started first time (cummings) and everything looked good.the only thing not working was the front wheel drive (oh Sh** !!) ,we needed to get the machine to work so went off grading all was fine ,we were still trying to sort out the problem,yippee it was the switch on the brakes that had gone so would not turn the front drive on it took us a while to get the wireing diagrames but at leased we are now sorted the part cost £120 ouch .
anyhow great machine love it,ihope it is reliable . Can anyone tell me what to look out for on the machine as in its weak spots.
Thanks all great forum ,i will post some pics when allowed .