Welder Dave
Senior Member
I was wondering if someone had a picture of how the hose for the clutch slave cylinder is routed from the master cylinder to the slave cylinder on an articulated Champion grader preferably a series II or III.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Champion grader hose routing help
- Thread starter Welder Dave
- Start date
Silveroddo
Senior Member
I'll see if I can get this for you tomorrow if you still need it Dave
Welder Dave
Senior Member
Thanks. I ran it up on top of the bundle of hydraulic hoses before connecting it to the slave cylinder. This puts it further away from the u-joint. I think the adaptor out of the master cylinder on the grader might not be original. I zip tied it to the bottom of the hoses the last time and it had more slack.