• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

1960's? ** 304 Industrial tractor odd clunking noise

Delmer

Senior Member
Joined
Jan 3, 2013
Messages
8,923
Location
WI
No backhoe on this one, but it's either this forum or Old Iron. A 304 is similar to a ** 50 with shuttle shift, two right pedals, one forward, one reverse.

Massey Ferguson 304 Industrial tractor with Perkins 4 203 engine has a clunking or light knocking sound that is once every ten seconds at idle, goes away at faster than idle speed.

My guess is something is floating around in the torque converter? it seems to be in the area of the sound.

Any other guesses, or has anybody actually seen this before?
 

Moonlite

Senior Member
Joined
Nov 11, 2013
Messages
519
Location
Texas
Dont know if this would apply to yours. I had a 30B that had a knock it sounded like it was coming from clutch. After tearing down to check clutch i found out it was pump mounts in transmission.
 

Delmer

Senior Member
Joined
Jan 3, 2013
Messages
8,923
Location
WI
Thanks, I'll have to dig into a manual at least and see if this is worth fixing.
 
Top