• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

hour meter

  1. A

    ASV PT100 Tachometer not Working and Hour Meter Wiring

    I have a 2008 ASV PT100. Thankfully, I was able to find a wiring diagram on this site which has helped me a lot. Many thanks to whoever posted it! The unit has an "interesting" past and I've spent a lot of time diagnosing and fixing problems and past mistakes. The diagram shows the gray...
  2. J

    Cat 308e2 cr hour meter

    Hey guys, new here and looking for some help. We have a 2015 Caterpillar 308e2 Cr and the hour meter isn’t working. I believe it’s showing 8888.8 but it definitely doesn’t have near that many hours on it. Any advice or suggestions are greatly appreciated. Product identification number...
    • jtgo4th
    • Thread
    • caterpillar electrical excavator hour meter
    • Replies: 7
    • Forum: Excavators
  3. T

    2004 Cat 287b not charging

    After reading several posts on this topic, im still scratching my head. Ive replaced the battery and alternator, as this is a well used machine. With the key in the ON position, i have voltage on 2/3 pins on the back of the alternator. It is 1V lower than the battery. My hour meter has also...
    • Todd_1991
    • Thread
    • alternator battery drain cab hour meter
    • Replies: 0
    • Forum: Skid Steers
  4. H

    CAT 259b3 Hour Meter Continues To Run When Key Removed

    Hi all, I've got a CAT 259b3 (serial number YYZ03203) with an hour meter that continues to run even with the key removed. Does anyone happen to have a wiring diagram? I've done some research, and it seems like it's going to be a wiring and/or alternator issue, but I haven't been able to find...
  5. S

    KX-121-3 2009 - no tach, no hour meter, No Aux error 53 on display

    I purchased this used machine with a new consul display. and new AI controller. The hour Meter says .4 hrs and does not move the. The Aux thumb does not operate and the RPM Gauge reads nothing. The display reads "53 sensor supply short 12V" The machine starts and runs great otherwise. But, I...
  6. Mightyjo3Young

    Bobcat 873 C hour meter not counting

    Hello everyone, first post here! Managed to get a lot of things fixed by searching and most of the info came from this site so thank you! To the point, I recently bought my first skid steer and have been working down the list of problems. Repacked lift and tilt cylinders, replaced spool valve...
Top