• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

glow plugs

  1. A

    JD CT332 Drive speed low, hydraulics not warming up, glow plugs not triggering

    Have a JD CT332 that as the title says, has slow final drive speeds. ( Boom and bucket seem a little slow too but not as bad as the drive for moving ) I've checked the charge pump pressure at the hydraulic filter test port and am getting roughly 480 psi at low idle and if I go up with rpm, it...
  2. S

    Takeuchi TL 150/ CLT 80 Heater Air/ Glow Plug Issues

    I have a Gehl CTL 80 that was having electrical issues so I bypassed all the electronics and made a manual fuel stop solenoid that I can kill the machine with. Since this happened, I am having issues with starting my machine, however if I give it a shot of starting fluid and it will start right...
  3. S

    2009 Caterpillar 277c glow plugs not getting power

    Hey y'all I recently purchased an 09 cat 277c but it has some starting problems. I insert the key and switch it to the on position wait until the unit beeps and then try to turn it over but nothing. It does crank but doesn't actually run. I tried spraying a bit of starting fluid on the air...
    • samhaley
    • Thread
    • caterpillar electric electrical glow plugs
    • Replies: 5
    • Forum: Skid Steers
  4. M

    303.5 glow plug operation?

    2008 303.5 glow plugs. What's makes them Not work. The light comes on when the key is first turned like a test for all the dash. But it doesn't stay on and cycle the glow plugs. Starts slow.
Top