• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

alarm

  1. P

    High engine oil temp warning EW180C

    Hey guys, the last week the excavator has triggered twice a high temperature warning. The common thing between these 2 warnings is that it happened after a 10-15km journey course when the machine stand still on a traffic light and not while operating. What could probably be wrong? Radiators are...
  2. S

    Hitachi ZX130 Limp mode, Fuel Filter Restriction Alarm.

    After 15-20 minutes of using the excavator, it begins to bog down slowly to idle, and begins to display a Fuel Filter Restriction Alarm, Fuel filter is clogged, replace fuel filter element. The first time around I replaced just the filters and same thing, ran for 15 to 20 minutes then slowly...
    • SMro
    • Thread
    • alarm bogs down clogged filter fuel hitachi idle limp limp mode restriction
    • Replies: 2
    • Forum: Excavators
  3. D

    Kobelco Error Codes

    New to me Kobelco Mark IV SK200 starts up with a "1 CHECK" alarm, which cannot be cleared and seems to inhibit running the 24 item diagnostic check. Does anyone know what the "1 CHECK" alarm indicates?
  4. C

    New Holland 190b, looses power at the tracks after 1 hr.

    I have new Holland 190b. 3k hours. has several issues. 1: it never has had enough power to push up to something and spin the tracks. After about 1 hour of use, it has almost no power. it will not push into a pile of gravel and fill the bucket. running in high gear without anything in the bucket...
    • case480
    • Thread
    • alarm final drive hot loss of power oil skidsteer tracks
    • Replies: 0
    • Forum: Skid Steers
  5. A

    Engine position sensor alarm

    Hi i have a 259d with an electronic engine that it's throwing a speed engine position sensor alarm I changed the sensor and it's still does it, what should the signal look like if I hook onto it with a scope to check it at the sensor and at the ECU
  6. D

    Alarm and N code on display

    We have a Case 580 Backhoe that when you shift into forward or reverse an alarm sounds and the letter “N” appears on the display?? Any ideas of how to fix??
Top