• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. J

    Case cx290 loses power and shows elec problem

    Finally got a few days without rain so I went to check out what Gary told me to do. While on my way out there operator called me and said it was running great. Ran it all day long without any problems. Guess I'll just have to wait until it does again, which I'm sure it will
  2. J

    Case cx290 loses power and shows elec problem

    Sorry hit post on accident. I haven't been able to get to the machine we've had 8" of rain this week. Hopefully it'll be dry enough Mon I can get to the machine and check it out
  3. J

    Case cx290 loses power and shows elec problem

    Thanks Gary. I have
  4. J

    Case cx290 loses power and shows elec problem

    Yes heavy white grey smoke and no active fault codes when it acts up. Fault code quit when I changed crank sensor. It ran good for 5-6 min after I changed it then started running as bad or worse than before. I don't know about air shutdown off valve what is it. My operator said it might run good...
  5. J

    Case cx290 loses power and shows elec problem

    Thanks Gary. I'll be out of town on a job tomorrow but I'll try this on Sun evening when I get it and let you know. After I replaced the crank sensor it was still missing and smoking but no longer had a code in diag screen 1
  6. J

    Used Excavator Buckets

    I've got a guy here local that had several buckets for sale a while back when I needed one. What size pins and spread does yours have
  7. J

    Case cx290 loses power and shows elec problem

    75psi
  8. J

    Case cx290 loses power and shows elec problem

    So I talked to case mechanic today and he said it showed 10 psi under load. I haven't checked it since it started these new problems. It's a straight cx290 with a Cummins and it only has 4k hours. 0115 code came from diag 1. The rest came from diag 3&6. When you say jump pin 30 to 87 which ones...
  9. J

    Case cx290 loses power and shows elec problem

    I have replaced vp44 relay, cam and crank sensor, boost sensor, New turbo, New fuel pump, hyd pressure sensors and I'm sure I'm forgetting something. Alt shows 27-28 volts constantly. I think he said 10psi on fuel pressure but I'm not sure. Yea something besides saying my hyd pump was bad in the...
  10. J

    Case cx290 loses power and shows elec problem

    Only active code was 0115 which case said was a crank sensor. Replaced it still no good. Case came out last week and adjusted regulators on pump but it would not show electric problem while he was there. Next day electric problem came back and now it's missing blowing smoke and will barely run...
  11. J

    Case cx290 loses power and shows elec problem

    Recently bought 2006 cx290 and after we moved it to a job machine would lug down and die if you put to in a bind tracking or working the stick. It would also intermittently show elec problem and go into limp mode. It's getting fuel and has all new filters. Had case come out and they adjusted...
  12. J

    case cx210 engine pulls down

    Thanks. I replaced a sensor and one solenoid on the pump. The pump has been rebuilt and I replaced the boost and speed sensors on the motor. Were you able to get it fixed?
  13. J

    case cx210 engine pulls down

    Could you send me the pump regulator updates thanks
  14. J

    case cx210 engine pulls down

    Travelling tech I've got the same problem with a cx290. Can you send me updates. Case dealer has been no help
Top