• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    Caterpillar 262B wiring Diagram

    Thanks I am doing a deep clean this weekend and was going to dig into this then.
  2. D

    Caterpillar 262B wiring Diagram

    I have a Caterpillar 262B while cleaning it this weekend I found a couple wires that are cut. The wires are right behind the cab on the left side. It runs fine the only thing that is not working is the A/C I just thought it was a compressor issue. wanted to see if anyone would have a wiring...
  3. D

    Caterpillar 302.5 Boom down/up pressure

    so I done this test and found that the cylinder did in fact creep down so I ordered a new seal kit for the cylinder. I was able to get it installed last night and tested it today and that fixed my issue. thanks to everyone for the advise and help.
  4. D

    Caterpillar 302.5 Boom down/up pressure

    Nige / Shopguy So, from the PDF you attached looks like this would be mounted on the side of the cylinder I do not have anything on the side of my cylinder. The lines from the cylinder go straight back to the main block under the floor pan. I will work on the test of blocking the line either...
  5. D

    Caterpillar 302.5 Boom down/up pressure

    I will work on this over the weekend.
  6. D

    Caterpillar 302.5 Boom down/up pressure

    Nige I did the test and the boom drifted about 2" in the 10 Min. SaarahMcgee I had the cylinder resealed about 5 months ago and it started this about 4 weeks ago. I did not see any damage or debris around the control valve.
  7. D

    Caterpillar 302.5 Boom down/up pressure

    I have a cat mini excavator serial 4AZ05894 302.5 has 1000 hrs on it. My problem is the main boom cylinder does not have a lot of down pressure and is falling several inches when I pull back on the stick. Going up it is also the same by moving the stick it will fall several inches before going...
  8. D

    Takeuchi TL8 supply pump replacement

    sorry for the delay had some family things come up and had to be away for a few day. Hope these help. https://www.sugarsync.com/pf/D4747942_09800666_24675 https://www.sugarsync.com/pf/D4747942_09800666_24674 https://www.sugarsync.com/pf/D4747942_09800666_866528...
  9. D

    Takeuchi TL8 supply pump replacement

    I have recently replaced the supply pump on a TL8 with the V3307-CR-T-EF02 engine. I having trouble getting it to start cranks but does not start? Does anyone have a engine manual I have the service manual for the TL8 but it does not cover the engine.
Top