• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Mattstepp04

  1. M

    310sk crank no start

    Thanks for the help. I’ll Post once the ecu comes in and let you know from there.
  2. M

    310sk crank no start

    So we went back and rechecked all 6 wires going to the injector harness and all were good. I think it was the guy holding them on the other end. So I went to the ecu itself and still only getting 4.3 volts coming from the 7 and 8 pin directly off ecu. Called Deere and the say I should be getting...
  3. M

    310sk crank no start

    So we got 4.7 volts on the purple and brown wires going to the injector harness from the ecu. Those were pin 7 and 8. Pulled valve cover and checked wiring in there on the injector harness and all good. Would I be leaning towards a computer at this point. The book doesn’t specify how much...
  4. M

    310sk crank no start

    Check out all connections. What we’ve found is we are not getting continuity from ecu to harness that goes into head. My question is could this just happen over night. Machine would crank all day then the next the day just turn over but no start. I’m to the point of my experience with electrical...
  5. M

    310sk crank no start

    I’ll definitely check the connection under the starter. It definitely seems electrical to me. Thanks
  6. M

    310sk crank no start

    2012 310sk will crank over but not start. ID is 1T0310SKKCE226103. Getting codes 0651.05 0652.05 0653.05 0654.04 and 1347.05. New filters to start and good pressure coming out when bleed them. I’m kinda at a loss on ideas as of now. Checked all fuses and are good. Ran fine on Monday came back...
See more
Top