SkFarmer
New Member
Hello, new to the forum and looking for some assistance with a compressor I purchased at an auction. It was purchased in the state of "Starts and Runs", however getting it home it does neither. The unit itself appears to be in great shape, however.
It is a 2017 Sullair 185 DPQ KU4F. The engine is the Kubota 1.8L
Upon trying to start, when moving the start rocker switch to ON, the startup sequence initiates and immediately flashes "Listening for Engine". Engine warning icon is also on.
I've checked the obvious things. All fuses are good. Relays seem good. And all the connections seem good, at least nothing obviously wrong with them. I have removed and cleaned the ECM ground as well. Battery has been charged and tested. Putting out 12.6V. There are no active codes either.
Does anyone have any further leads to investigate? Thanks in advance
It is a 2017 Sullair 185 DPQ KU4F. The engine is the Kubota 1.8L
Upon trying to start, when moving the start rocker switch to ON, the startup sequence initiates and immediately flashes "Listening for Engine". Engine warning icon is also on.
I've checked the obvious things. All fuses are good. Relays seem good. And all the connections seem good, at least nothing obviously wrong with them. I have removed and cleaned the ECM ground as well. Battery has been charged and tested. Putting out 12.6V. There are no active codes either.
Does anyone have any further leads to investigate? Thanks in advance