• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

544k no power to display

C

Critical Path

New Member
Joined
May 17, 2015
Messages
2
Location
Denver, CO
2012 544k when power is turned on the display is blank and the start button light closest to steering wheel flashes repeatedly. Replaced both solenoids in power control station and checked all micro fuses. Any ideas would be much appreciated. Thank you
 
S

Simon C

Senior Member
Joined
Jul 1, 2015
Messages
3,098
Location
Rocky Mountain House , AB., Canada
Occupation
Heavy Equipment Mechanic
You will need a electrical schematic to figure out what wires power the display and what wires are the grounds, and then will need to test these to find out if power is there or not.
Best post your complete serial number as there could be variations by serial numbers.
Simon C
 
You must log in or register to reply here.
Top