• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

scissor lift

  1. T

    Skyjack SJ7127 Drive Speed Issues

    I have a Skyjack SJ7127 RT that works great other then when I push the joystick all the way forward or all the way backward it drives a lot slower then if I just push it forward a little bit or backward a little bit. If I push it forward a little bit the high/ low throttle and high/low speeds...
  2. H

    2001 Genie GS-2668-RT Runs then dies and Lift will not work.

    We bought this 2001 Genie GS-2668-RT Scissor lift (GS68-40644) Replaced ECU & Hand Controls rebuilt by Hindley Electronics Will start gives no Codes, then dies immediately. Every single function works Except lift and dying. If I power the fuel pump and fuel switch on the bottom of the...
  3. K

    Snorkel SPL3284-4AG Service / Parts Manual

    Does anyone have a service or parts manual for a Snorkel SPL3284-4AG scissor lift that they would be willing to share? I'm doing some troubleshooting and an electrical and hydraulic schematic would make it a lot easier.
    • kerautio
    • Thread
    • 5000 series parts manual schematic scissor lift service manual snorkel spl3284-4ag
    • Replies: 3
    • Forum: Forklifts/Telehandlers
  4. T

    JLG 660SJC Boom Lift 2 Speed Issues

    I have a 2001 660SJC track boom lift that is having two speed issues. It is the machine that has a steel tracked excavator undercarriage instead of wheels. Runs great in lower speed but doesnt want to go into 2 speed. It will sometimes surge like it goes into 2 speed for a second and then kicks...
  5. P

    Genie GS-1930 no functions

    I have a Genie scissor lift where no functions work. I have good voltage coming from my batteries and into the motor controller and out to the rest of the system. Whether the lift is in platform or ground mode, when I hit the "up" switch I get an "A5" code, (Which I believe is the software...
  6. J

    Help - new operating panel on skylift scissorlift

    Wondering if anybody can help me out, I’m remodeling my shop and I’ve used this thing plenty of times over the years but it’s been a while. It’s my dad’s scissor lift, not sure the model number but it’s old and gotten use. Anyway they had to change the operating panel at some point. Now I...
  7. C

    1999 JLG 3369 Electric RT not steering more than 1/2" either direction

    Let me start by saying; I am a complete noob who is trying to get an old lift working again. This thing has seen better days, but I got everything working except the steering. To be more specific, the steering does work in both directions, but only the maybe an inch (either direction). I can...
  8. K

    JLG 260MRT engine surging when functions are being used

    hello everyone, i am working on a JLG 260MRT and the engine is surging when driving and when steering. we have replaced the throttle actuator, the fuel shut off, replaced the valve cover gasket, repaired wires, replaced the ground control circuit board, reprogramed the system, checked...
  9. 1

    Genie Lift GS 2646 AV Low Voltage Error

    Hello, I'm having an issue with a Genie Lift GS 2646 AV I'm getting a "LO" Voltage error on the joystick screen, Replaced batteries and am getting 24V across all 4, fully charged Connected laptop to the GCON with SMART LINK Getting Errors: C052: Tilt sensor not detected C021: PCON not...
  10. H

    Grove SM3248 scissor lift won't go forward

    Hello mates, When I first got the scissor lift it would move forward. Now it goes up down and backwards though makes no noise when joystick is pushed forward (don't hear the pump working). I'm wondering if something stopped working in the controller board. Thanks in advance
  11. M

    GS 2668 RT - lifts very slow

    Hi everyone. I couldn't seem to find a thread specifically for scissor lifts. Hopefully it is ok here. I have a 1999 GS 2668 RT scissor lift. I bought from another construction company in town when they upgraded. It has a new motor and new hydraulic pump. Everything works great, starts and runs...
  12. E

    Genie Controls Issue Puzzling

    Having a puzzling issue with a Genie 2632 electric scissor lift with Genie's Smart Link diagnostics box For some reason, Ground controls (GCON) works when key is turned to the right But when key is turned to the left for PCON nothing happens, no LCD, nothing. So we can have the lift go up and...
  13. Goodwin93

    Genie 1930 lifting issue

    I have a gs1930 at work that’s giving us some trouble. It will not lift more than 2 or 3 feet with weight on platform while using the platform controls. It will lift from ground controls. I’ve already swapped control boxes, no luck. Pressure tested the system and got about 3200psi at the lift...
  14. D

    Equipment rental question

    We rent scissor lifts, MEWPs, and excavators in the Texas area - usually through UR or Sunbelt. In the past I've always picked up the phone to speak to our main contact. Now I'm wondering about using the online portals/apps. Has anyone else used them? Looking for any advice on what to look out...
    • DavidPearce
    • Thread
    • equipment equipment leasing excavator mewp rental scissor lift
    • Replies: 0
    • Forum: Shop Talk
  15. Gearflow

    Noblelift?

    Anyone here have experience with Noblelift? Saw their facility in IL and was impressed with their 5,500lb FE4P55N Forklift. Their scissor lift was awfully similar to some of the other major brands (JLG in particular), curious to know if these guys manufacture some of the other forklifts too.
Top