• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

removal

  1. P

    Komatsu D21a-6 Steering Clutch Removal: CAN’T PULL CLUTCH OUT OF HOUSING

    I’m trying to remove the steering clutch out of a Komatsu D21a-6 but can’t get it to budge. I have unbolted the 16 bolts (eight on each side) holding the clutch drum in place, full can of PB blaster to break any corrosion between drum and flanges, rigged a comealong straight above and tried...
    • patriksartz
    • Thread
    • d21a-6 komatsu removal steering clutch
    • Replies: 7
    • Forum: Dozers
  2. J

    How would you remove these bushings? Komatsu pc35mr

    Doesn’t look like there’s a stop shoulder in the bore, so they could likely be pounded down but that does seem like a lotta work. I’m not confident enough with a torch to cut them out with gas. Any other cutting tool you’d recommend? ID on the bore is 100mm.
  3. Nick350

    How To Change & Tube Backhoe & Tractor Tires

    Hey ya'll I am back with another how-to video, this time documenting a tire change on our Ford New Holland 555E. We had a local tire repair guy come out and swap them while showing us the ropes. I highly recommend Darrel's Tire Repair in Shelbyville TN. All that being said I am not an expert...
  4. S

    1991 Telelect Captain II Digger Derrick removal

    I will preface this post by saying that I don't have much experience with cranes, especially digger derricks. I recently bought a 1991 Ford F800 with a Telelect Captain II Digger Derrick pole crane. I have removed the boom and I am struggling to get the turntable to come off. The rotation...
    • Steven66
    • Thread
    • crane derrick digger gearbox removal telelect terex turntable uninstall
    • Replies: 3
    • Forum: Cranes
  5. J

    Mesquite Removal

    I was hoping to tap into the forums knowledge here from different perspectives on Mesquite removal. The first is as a customer and second as someone looking to potentially get into the mesquite clearing business. I am looking to have about 300 acres cleared of mesquite, varying density, mix of...
  6. B

    JD 310SE Transmission Filter - Removal Tool?

    Hi, I recently purchased a JD 310SE for personal use and its my 1st time working with heavy machinery. I would like to know if there is a recommended tool to remove this filter. I released pressure from the system (dip stick removal) and used a friction type filter wrench but could not unseat...
  7. MarD

    Cat 299D Oil Pan Removal

    I searched the forum and couldnt find anything specific, so i figured id post for the first time. When removing the oil pan from a cat 299D, does anyone know if removing the engine is absolutely necessary or can i remove the engine mount closest to the rear, loosen the rest, and angle the engine...
    • MarD
    • Thread
    • cat 299d oil pan removal
    • Replies: 4
    • Forum: Skid Steers
Top