• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    grove RT 600

    Installed new valve this afternoon. Everything is work fine now.
  2. B

    grove RT 600

    I bypassed the pressure reducing pressure relieving valve and the the rear steer came back. I did not try the swing because the brake release comes of that valve. Been one is on order .
  3. B

    grove RT 600

    it runs forward to the sequenching valve and the out rigger controls the to the swivel. can't locate the year model it is a RT625 to be exact.thinking about bypassing the outriggers and see what happens .they are working fine. anyway to test the swivel short of tear down
  4. B

    grove RT 600

    So by looks each pump section is splined to the one in front of it. So one section could loose its splines You would still most likely have to replace two sections to repair it
  5. B

    grove RT 600

    Interesting idea switching lines. I will try that. Don't like the though if a blown swivel but it was in my head. Thanks
  6. B

    grove RT 600

    I don't have the year in my head o could check in the am. But I know it is lever controls
  7. B

    grove RT 600

    the manuel shows the swing and rear steer alone on the system. the outriggers work fine as does the boom. telescope and cable winch all other functions work fine . Is there a coupler between each pump section there are three sections
  8. B

    grove RT 600

    have not had the pump apart but i believe it's a gear pump.
  9. B

    grove RT 600

    Hi i'm working on an older grove RT 600. It lost it's rear steering and swing function . it will swing and steer very slowly at high rpm only. when i hook up a test guage to the test port i get 400 PSI. i have checked the pressure relieve valve and the flow diverter valve and see no problem...
Top