• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    980g no functions, no hydraulics, no drive

    the park brake holds the machine i believe he used the shop hydraulic hand pump to release the park brake thats what i gathered this morning from him
  2. C

    980g no functions, no hydraulics, no drive

    you were correct on that picture it is the parking actuator that line next to it was off of it and should have been going to the fitting on top of the actuator the road guy disconnected that to get it to move onto the trailer i believe the top of the actuator is leaking the operator is coming...
  3. C

    980g no functions, no hydraulics, no drive

    first off I want to thank everyone for there help on my 980g issue after fixing the wire's and fuses to the alternator and the RPM gauge worked and the battery light went out I put alittle air pressure to the hydraulic tank and found a loose suction line, the cause of the cavitation noise from...
  4. C

    980g no functions, no hydraulics, no drive

    Okay guys thanks for all the information I figured out the oily thing it is the park brake actuator I didn't think about checking the alternator but yes I had to jump start this morning I went out and found a blown 20a fuse coming from the batt post from alt going to a solenoid next the the main...
  5. C

    980g no functions, no hydraulics, no drive

    Transmission charge pressure is 380psi
  6. C

    980g no functions, no hydraulics, no drive

    Pushed on lowboy and pulled off here is some info I got s/n is 2kr04273 980g 35938 hrs Codes are 030 0177.08 030 0821.04 030 0819.02 Serve code 081 0168.01 081 0622.05 074 0350.13 082 0168.01 Checked all fluid levels first all good...Machine does not build brake pressure also No...
  7. C

    980g no functions, no hydraulics, no drive

    awesome thanks for your advice its greatly appreciated
  8. C

    980g no functions, no hydraulics, no drive

    he is right that it doesn't move haha I'm gonna look at it tomorrow see if i can figure out anything i just talked to him and he agreed we should take a further look into it instead of just pulling the engine ill keep you posted
  9. C

    Backhoe controls stiff

    not sure about your machine but i know the older cases 580d-580k suggested a HTO additive that prevented moisture in the hydraulic oil and deposit build up around valve spools due to the lack of additive in the older tch or cheaper tractor supply hydraulic oils i have come across it change the...
  10. C

    980g no functions, no hydraulics, no drive

    the boss thinks he's a superstar that knows everything, he hasn't looked at it either...road guy went out looked at it verified it doesn't move and sent it to the shop....commonsense is not to common
  11. C

    980g no functions, no hydraulics, no drive

    unfortunately working at the Case dealer we don't have any access to cat software or service manuals...honestly my boss just asked me if i can come in tomorrow for some o/t and start pulling the engine out....i think that sounds little crazy without knowing whats going on, being a mechanic i...
  12. C

    case 621 b brake pressure

    these are wet brakes in the axle housing correct? or the older air assisted disc brakes?
  13. C

    980g no functions, no hydraulics, no drive

    hey somehow i got myself into working on this cat 980g at work and not having any information on this is not helping me....i have no hydraulics, no steering, no loader bucket etc etc. and also the machine will not move...what would cause them both to quit at the same time? what should be first...
  14. C

    Case 580 Super M service brakes soft

    not a problem glad I could help you, also keep in mind using good the right oil-hytrans oil in the hydraulic tank, transmission and in your models rear axle with the axle brake additive goes a long way for performance and durability, some customers who do there own services come in with a groan...
  15. C

    89 case 580 super E no power problems

    i may be confusing a 580d with your 580e but i think there inj timing are set the same, slightly loosen the 3-9/16" nuts on the pump and you should be able to turn the pump several degrees, the mounting holes in the pump should be slotted, with the engine running at idle rotate the pump until...
  16. C

    Case 580 Super M service brakes soft

    theres really only two major brake components in that machine first i would check the rear level and thats probably the most simply check, i would also do what goose said just to be 100% but your about due for brakes…think about it like the brakes on your car once you've driven so long with the...
  17. C

    Case 580 Super M service brakes soft

    pull your FILL plug on the rear axle and expect to have oil come out let it drain to the proper FILL level put the drain plug in and heat the oil up in the rear by driving the machine park it and let it sit for about and hour pull the FILL plug back out…you'll probably pull .5gal out…that means...
Top