• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. H

    Case CX 210 2005

    So without any load on the tracks as if you lifted one side you get no issues with speed/consistency of travel? Both sides?
  2. H

    Case CX 210 2005

    Smart!
  3. H

    Case CX 210 2005

    If no catastrophic destruction was found in the finals- get pump pressures and flow rates and make sure those are in spec, make sure hyd oil isnt low or contaminated, start simple and make sure you check off the easier things before you go diving into hydraulics. If you have a SN for us I could...
  4. H

    HDM LEVEL 2 SASKATCHEWAN CHALLENGE

    Hey Everyone, I have close to 7k hours in the trade but havent gone back to school due to life happening. I am signed up to challenge my level 2 on May 13th. If anyone has any knowledge on what they try focus on for year 2's and would likely be in the challenge exam and would care to help me out...
  5. H

    Excavator tracks weak turning

    Yes that looks like a sliced Oring- possibly giving you a good enough bypass that would make your turning sluggish. Also knowing the problem worsens when hot could be influenced by oils viscosity changing due to temperature- when its hot it becomes alot more water-like, meaning it can pass...
  6. H

    Volvo L90F fuel issue.

    My first thought was also testing injectors individually, or pressure from fuel pump, but if its lagging and throwing at idle maybe that pump isnt being driven hard enough to send enough fuel through, causing the code? What do you guys think? Anyone figure something out?
  7. H

    444h dies when hydraulics are used

    Replaced an intake manifold pressure sensor, and temp sensor the other day on an excavator- the turbo wasnt kicking in to keep up with the Hyd demand and would stall as soon as id get it close to 4500+psi on either p1 or p2. First checked for fuel from pump- checked ok. Funny it was the turbo...
Top