• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    Mustang Mtl25 hydraulic problems

    So I just noticed that the tilt is doing the same thing
  2. D

    Genie gth-5519 brake system warning light won’t crank

    Genie gth-5519 brake system warning light keeps popping fwd rev selector switch fuse when you take park brake off already replaced selector switch and park brake switch any leads?
  3. D

    Mustang Mtl25 hydraulic problems

    I’ve been wanting to take the cylinders apart for a week now but just haven’t yet I dead headed them and took hoses off empty side and didn’t get any fluid out when I loaded it but idk if that’s the right way to check the piston seal I’m going to run it hard tomorrow and put some weight in the...
  4. D

    Mustang Mtl25 hydraulic problems

    I’ve been wanting to take the cylinders apart for a week now but just haven’t yet the owner says he can deal with the spot in the joystick so at this point I think I’m going to run it hard with some good wright in the bucket and if things hold up I’m going to send it out the door hopefully when...
  5. D

    Mustang Mtl25 hydraulic problems

    So I changed pilot filter and put gauges on pilots going to boom valve and head side of rams as I pull back on pilot control at half speed I have 200psi and around 800 psi on cylinder. Pilot control all the way I get around 450 and around 1000 on cylinder. When I peg cylinder out I get around...
  6. D

    Mustang Mtl25 hydraulic problems

    Yes sir I just picked up pilot filter and about to get the necessary fitting for gauges I will let you know what I find out thank you for the help and guidance
  7. D

    Mustang Mtl25 hydraulic problems

    The symptoms happen wherever the boom is stourpain
  8. D

    Mustang Mtl25 hydraulic problems

    So I deleted the self leveling valve and no change. I noticed I hear a lot of flow coming from the valve when I get the pilot control in that position where the boom bleeds down I found the main relief on the stack that has the inlet from the pump and the return that goes to filter gets warm...
  9. D

    Takeuchi Tl150 hydraulic problems ( boom drifting)

    Did you figure the problem out I’m having an issue similar to this but only when you pull back on the pilot control
  10. D

    Mustang Mtl25 hydraulic problems

    I believe it’s an 05 it doesn’t say on the tag if the self level delete doesn’t work I’m going to lean on the pilot control I changed main hydraulic filter but did not change pilot filter so I think I need to try that as well
  11. D

    hydraulic bleeding down unless full pedal engagement

    I’m having the same issue with a mustang mtl25 still can’t figure it out but I haven’t pulled rams apart yet
  12. D

    Mustang Mtl25 hydraulic problems

    Just the stack that controls the boom up and down I don’t think there was anything wrong with the old one myself but oh well I still have a suspicion that one of the cylinders is bad just because he bent one so severely he had to buy a complete new cylinder he said the problems arose after the...
  13. D

    Takeuchi TL130 weak curl and aux hydraulics

    Did you ever figure it out
  14. D

    Mustang Mtl25 hydraulic problems

    So I pulled the spool and got my hands on the original they do match. the new spool was a little sticky and I was able to get it moving freely I did discover aux spool sticking and freed it up as well but did not help the bleeding off when booming up at about half way back on the joy stick. I am...
  15. D

    Mustang Mtl25 hydraulic problems

    are you familiar with mustang skid steers? What do I check first I don’t have gauges or anything but I will get them everything is British standard so fairly common I was just about to delete the self leveling valve and see if that was the problem but yes your right I’m basically guessing at...
  16. D

    Mustang Mtl25 hydraulic problems

    I haven’t put a gauge on anything previous mechanic said he thinks it’s line reliefs but I’ve replaced them with one of the 5 others and set the screw all the way in and no change it’s only on that valve I can adjust relics on curl valve and get a change I did check cylinders and they are fine...
  17. D

    Takeuchi TL130 Lost boom down pressure

    I’m having a similar issue but with the up when you pull back on the joystick it goes up then when you gradually let off it wants to bleed down did you figure it out?
  18. D

    Mustang Mtl25 hydraulic problems

    I have swapped hoses on pilot control and problem remained but I have not checked the pressure of the pilot system yet
  19. D

    Mustang Mtl25 hydraulic problems

    I have a mustang mtl25 and when you lift the boom at full speed everything is fine but when you ease off the joystick to slow the lift speed the boom wants bleed down when joystick is back to neutral position it stops and holds. I have pulled control valve apart checked spools in that valve and...
Top