• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. 1

    Cat 306 travel pedal fault

  2. 1

    Cat 306 travel pedal fault

    Cat 306cr. Code:5604-3. Put a jumper between wires 1 and 2 and code did not change to 5604-4. So not a bad sensor? Did a general overlook at the wiring from the sensor all the way through the wiring harness and did not find anything rubbed through or corroded. Nothing wrong with the connector up...
  3. 1

    Takeuchi 153FR randomly stalls

    Hey guys. 153fr Same excavator that had the fuel water separator plugged up. Ran awesome for about 30 hours since I’ve cleaned out the separator. Current issue is it’s now stalling again. Sputters and bogs before it dies. Will not start right away after it dies. On high rpm and when operating...
  4. 1

    Takeuchi 153FR randomly stalls

    heymccall huge thanks. As advertised the fuel water separator inlet elbow was basically fully clogged. After a thorough cleaning the machine runs awesome.
  5. 1

    Takeuchi 153FR randomly stalls

    Stalling Issues Hello I’ve got a TB153fr that will stall. It’s developed some what of a pattern. After an initial warm up from a cold start it will run good up intell 25-30 minutes of operation where at that point it will stall about once a minute. To restart, turn the key to off and then...
Top