• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. W

    Can you ID this pull scraper?

    I owe you a cyber beer. I looked up your make an it turns out it was originally an ORTHMAN SOILMOVER 75RF. And as you said has been converted. I appreciate the information.
  2. W

    Can you ID this pull scraper?

    It's being advertised as a 7 yarder. I spoke with the owner and he says they redid it a year ago or so and put the Deere decals on. I haven't been able to cross it over to any make or model and it's a bit far to go inspect without knowing all i can ahead of time. Thanks for any help, Tim
  3. W

    Stuck! How to get it unstuck!

    Did the water in the hole pool up from the surrounding soil, or did it rain after he dug? I'm thinking maybe put a pole under the bucket and lift the front end up and put a pole or two under the front end of the tracks, and a few in front of those poles, then drive up on the poles, if you've...
  4. W

    I need advise on what track loader to buy

    What was the problem with the mulched up cedar? Your rocky description has me thinking Spring Branch and-> north or west of there. If that's right A small-medium track loader with a 4 in 1 bucket might be what you are looking for. You can dig out and pile the bigger rocks that need moving but...
  5. W

    John Deere 455 G

    I've done pretty much what you describe on 32 acres with an 03 455g, I've put about 240 hours in the last two years, cleared up a pretty bad creek bottom, put in a 1/2 acre pond, and knocked down plenty of dead trees, and some that were just in the way. I too considered a smaller skid steer type...
  6. W

    455G Oil Pan Removal

    Can this be done with the engine in place or is there not enough room to drop? A rock got in and vibrated a hole through the pan. Thanks, Tim
  7. W

    Deere 455g pedal sticking

    Thanks, Eric, I'll try some lube on the linkage and cranks.
  8. W

    Deere 455g pedal sticking

    I've got an 03 with 3200 hours. An the left pedal sticks about a quarter of the time and I have to pull it back out with my foot when it does this , I've pulled the decking and can see no binds bends or obstructions to the linkage. Is there anything else I can look into before calling a...
  9. W

    my test to post

    and huevos rancheros with patty sausage.
  10. W

    my test to post

    gulf oysters
  11. W

    my test to post

    bbq
Top