• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. J

    Case 580C Stalling out

    Yes I ran it with the line removed after the last injector. I have also removed all of the tubing between the injectors and cleaned and replaced seals.
  2. J

    Case 580C Stalling out

    Hi, yes I seem to have good fuel flow in the tube right before the fuel pump when I have pulled that line. I have also tried with the fuel cap off and with the return line (with and without the check valve) and same results.
  3. J

    Case 580C Stalling out

    I really don't think that I have diesel in the oil. I drained it and it just seems like used oil consistency wise and no smell. I filled it back up to full and might run it for a bit tomorrow to see if that level changes at all. I did order some dye that I may try in the fuel to see if it...
  4. J

    Case 580C Stalling out

    Thanks, you might be on to something. It does look to be high. Not sure the best way to tell if that is from diesel. I couldn't smell it. Would that be failed umbrella seals on that front shaft?
  5. J

    Case 580C Stalling out

    Thanks for the reply. I have tried it with and without the check valve, as with it being similar to the previous issue that seemed like a good starting point. Maybe I should throw in another check valve, though the current new one still looks clean inside. I have pulled the return line after...
  6. J

    Case 580C Stalling out

    Hi, I rebuilt my roosa master fuel pump last year after the common rubber weight retainer failure. It went smoothly thanks to everyone's advice on this site. I added the solid weight retainer and it ran great for the season. It is now acting up. It starts and idles fine and I can increase...
Top