• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    Noise Cancelation

    I bought Duct Insulation, self adhesive foil and foam,12 by 1/8 by 15 foot from Home Depot for about 20.00 It was manufactured to put on Home A/C metal ducting. It may not help much but it may surprise you and is fairly cheap.
  2. R

    This will be an interesting thread moving forward......

    Good Job Joe H, I will buy you a beer next time I am in Utah. This can also be used to describe a person or their actions.
  3. R

    Bobcat E85

    Posting a serial number is always a good idea along with has anything been done recently to machine.
  4. R

    This will be an interesting thread moving forward......

    An inclined plane wrapped helically about a vertical axis, What am I describing??
  5. R

    The Hitachi EX100-1 project

    An air filter hopefully is not expensive and can cause problems.
  6. R

    TC62H Gauge Problem

    I suggest you post a serial number so the smart guys can guide you
  7. R

    Shop floor concrete

    The reason I said multiple 04 inch drains is so they would be spaced out far enough you would not have to have much pitch or none, just something to have the liquids flow down the drain. Since the drains are regulated, it does not make much difference. Carry On.
  8. R

    John Deere 85D temperature guage wrong

    The smart guys will want a serial number
  9. R

    Cat 246C Fuel Injection Pump replacment

    mjones35, re read post number 05, especially the last line.
  10. R

    CAT 416 L9P07254 air conditioning malfunction

    Define system pressures are fine, What are they???
  11. R

    Shop floor concrete

    You may want to consider having multiple 4 inch drains to be able to have whatever you wash down to drain out of shop. And, You can not have to much light.
  12. R

    John Deere 325g ac stopped working after wash

    Have you checked the pressures in the AC system??
  13. R

    931B ALMOST READY TO PUT IT IN THE DIRT.

    I will bet your neighbor will allow if you do some work for him/her.
  14. R

    Crowd Arm Broke at Thumb Welds

    I have used them a few times and it was not a perfect match but the person operating was very knowledgeable, Some people may not have the knack or experience.
  15. R

    D3 dozer stops moving

    First suggestion is to post serial number of the machine so the smart folk on here can give you some good pointers, Also, do you know if any work has been done to it recently??? Have you checked all fluid levels?? The more info you provide, the better feedback you get.
  16. R

    D6n belly pan

    Be careful with Pressure washer so you do not get any water in your electrical connections.
  17. R

    Crowd Arm Broke at Thumb Welds

    Regarding paint matching, check with your local Sherwin Williams store. Take a paint chip with you, they have a machine that will read the paint chip and probably come very close to what you have.
  18. R

    New guy first skid steer

    If you can not fix it with a hammer, you have an electrical problem.
  19. R

    Heat related problem with Komatsu PC35MR-2

    Well said!!
  20. R

    Cat 322cl cab heat not working

    Is the heat actuator in the cab cable or electrically operated?
Top