• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. K

    Case 580C backhoe control valve

    I asked a question on FB 580 page and a guy on there suggested that although it sounds a little complicated to me. I’m sure once you get into it, it probably makes more sense but I’m kind of trying to avoid that
  2. K

    Case 580C backhoe control valve

    I think it’s just the load checks and the secondaries. Don’t really see any leaking between sections. Are they both on the same sections that come out from under the cup on the bottom?
  3. K

    Case 580C backhoe control valve

    This is an older post but I am looking to do this on my C and after looking at it kind of thought the same thing. I was reading that some do this in place but I can’t see how they could drop out of the bottom with enough clearance.
  4. K

    Case 580C Backhoe leaky valve?

    I was looking on Messicks website. I think I’ve gotten stuff from them before. Yeah 12.00 is a little crazy for one oring. I’ll look around and see what I can find. I just got all the part numbers from the manual.
  5. K

    Case 580C Backhoe leaky valve?

    Are you able to elaborate on this? I see what they did here but having a hard time imagining how it’s used or the purpose of grinding the two flats on the head unless it’s more obvious once it’s opened up. Thanks
  6. K

    Case 580C Backhoe leaky valve?

    Normally I would look aftermarket but it seemed like the one consistent message I saw across most threads I read was to only use Case orings. Have people had success with other brands?
  7. K

    Case 580C Backhoe leaky valve?

    Thanks guys. I will stop over to the case dealer after the holiday and grab some orings. Any special tools needed for this?
  8. K

    Case 580C Backhoe leaky valve?

    Thanks for the reply’s. So the orings you are referring to would be in the section that I circled in yellow? Is there anything else that might be good to replace while I’m in there? I’ll do some more searching to see if anyone has a video or good write up on the disassembly and replacement...
  9. K

    Case 580C Backhoe leaky valve?

    Hey guys. Been playing with my “new to me” Case 580C. This is my first real experience with a backhoe/loader of this size. I was using it today and began digging a small-medium stump up and noticed that it doesn’t seem like it has as much power as I would expect. Also when the bucket...
  10. K

    Tire size

    I haven’t seen that yet. I had a pretty good rhythm using the bucket along with the wheels in rev to get myself freed a couple of times but I would get out of one and sink into the next. I underestimate how wet it was in that area. I found Hagan tractor parts online and I think I have...
  11. K

    Tire size

    I have a new to me case 580c. I bought it after my wife and I bought a 5acre unimproved lot and thought it would be helpful for various tasks. It gets stuck fairly easily and the locking differential was eliminated by a previous owner. The internals are still intact but the shaft was cut...
  12. K

    Case 580c locking differential

    That’s perfect thanks.
  13. K

    Case 580c locking differential

    Does anyone have a picture of what the linkage looks like on the 580c locking differential. I have the little box that mounts to the side of the brake housing and when I had all of that apart I know I have the internals but it seems like someone cut the shaft right where it exits the box...
  14. K

    580c operation for dummies

    So I’ve had a “new to me” 580C for about 6 months now and it’s my first introduction to a piece of equipment like that. I had a couple of maintenance issues I was working on including getting the brakes working. Now that they are working I am looking for some pointers on running it. I...
  15. K

    Case 580C brakes

    I wrapped up the brake project (I think). I had a really hard time getting the right brake master cylinder to start flowing fluid. Not sure if it should have been bench bled before installing. The left side seemed to bleed fine. I ended up removing the right side master and used the rod...
  16. K

    Case 580C brakes

    Had some time to work on the brakes today. I got the left side backing plate snuggled up and removed the right side plate. I replaced the oring but the seal still looked like it was in really good shape so I decided to leave it for now. It seems like the design of the backing plate is to...
  17. K

    Case 1835b charge psi

    I purchased a used 1835b a few years back. I went through a lot of maintenance things to get a base line on it. I replaced both hydraulic filters at that time as well as changed the hydraulic fluid. This past winter while using it on my property I noticed the charge psi light was on. The...
  18. K

    1845C Chain Access Cover Gaskets

    I know this is an older thread but does anyone still have a source for these? I have a 1835B and looking for some gaskets for mine. Not sure if they are the same shape or not with the 1845.
  19. K

    Case 580C brakes

    Not completely drawn in. I haven’t used the shorter bolts on it yet to suck it in. I was kind of waiting on another oil seal since I distorted the first one I tried to put on.
  20. K

    Case 580C brakes

    That’s good advice. The oring came with the brake packs, band and seals so I’m assuming it’s the same size. It fits well and a little more snug than the old one coming off. I can pull the plate back off to get a better look and make sure the new seal didn’t get damaged while trying to get...
Top