• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    Ex400-3 anyone have wiring diagram?

    I'm fiddling a wire harness from an ex400-3 into my 992elc. Got to the engine and seeing if anyone has the Hitachi end wiring diagram for the charging system and engine sensors etc since these plugs are not compatible. Thanks! Matt
  2. M

    Deere 992elc vs hitachi ex400-3 parts interchange??

    Thats kinda what i thought and theres only a few engine plugs for oil press and coolant temo etc that could be different... Trying to order these chinese parts and they look identical but they say are different. *Shrug*
  3. M

    Deere 992elc vs hitachi ex400-3 parts interchange??

    Hi all. As some have seen ive been on and off tinkering with my 992elc trying to get it working. Looks like i need some electronics. Deere parts are almost non existant and i know the machine is the same as a ex400-3. Looking to change the wiring harness, pvc, and ec. I can find the ex400-3...
  4. M

    How to install angle sensor on 992elc

    [email protected] Thanks tool_king!!
  5. M

    How to install angle sensor on 992elc

    Got another thread open with the problems but i am replacing the angle sensor on pump 1. Service manual says to use the diagnostic tool Whats the best way to do these without the diagnostic tool? Thanks Matt
  6. M

    Calling Deere/Hitachi guys. Slow hydraulics. 992elc

    [email protected]
  7. M

    Calling Deere/Hitachi guys. Slow hydraulics. 992elc

    John deere 992elc. Left track is slow. Swing is slow. Dont think the pump is operating correctly due to a bad sensor or wiring. Anyhow have a diagnostic procedure for the various pump sensors. Ohm specs? Voltage?
  8. M

    Help Fixing up a John Deere 992elc

    Hi everyone thanks for all the replies. I got the flu pretty bad last week and it knocked me out of the loop and ive been playing catchup. Ok, got the throttle cable installed today so i can rev it up and it purrs nice. All fuctions seem to operate in a reasonable manner except swing in both...
  9. M

    Help Fixing up a John Deere 992elc

    Sure quiet around here! Anyone?
  10. M

    Help Fixing up a John Deere 992elc

    Haha well i already ordered the cooler a few days ago so it should be here soon. I will be putting the throtttle cable in this weekend but hooefully someone can chime in with how the motor is supposed to mount and if we really need it. Itll get running one way or another i know ive seen the...
  11. M

    Help Fixing up a John Deere 992elc

    Hi all! Well thanks to everyones good advice i abandoned the case 9050b from the earlier post and found a well loved but decent john deere 992elc. It starts and runs, i loaded it and took it home already. It was a big bigger than i wanted but the price was great as i got it for almost free. Its...
  12. M

    Case 9050b: help bringing it back to life

    Thanks much!
  13. M

    Case 9050b: help bringing it back to life

    Ok all thanks for all the info im closing this down on the case machine. Found another hopeful prospect, john deere 922elc. Little bigger than i wanted but condition is much better. Own states had a problem with slow travel and swing, diagnosed as electrically not stroking the pump? I havent...
  14. M

    Case 9050b: help bringing it back to life

    The jungle eats things here if people let them sit. Not too.many machines available on the island for a reasonable price and its 20g or so to ship one from cali other wise i wouldnt be looming in the scrap pile. I think this one might be a lost cause from what everyone is saying and i am...
  15. M

    Case 9050b: help bringing it back to life

    Can you describe this device and its operation a bit more?
  16. M

    Case 9050b: help bringing it back to life

    More pics Pulled what i think is the pilot filter and found this white fluid pretending to be hydraulic.
  17. M

    Case 9050b: help bringing it back to life

    Alright fellas! Followed john c video and pulled the strainer. I dont know how to describe this substance besides "snot" Blew it off with air, brake cleaned. Swirled it around and picked up some more and cleaned it. Reinstalled. Started machine. Tried hydraulics quick with no response. Shut off...
  18. M

    Case 9050b: help bringing it back to life

    Thanks fellas i will check both those hopefully later today and post the status. Hopefully solve the suction issue!
  19. M

    Case 9050b: help bringing it back to life

    I had the spring loaded cover for the tank off of what looked like an in tank filter. Does that filter on its way to the pump or on the return side? I didnt get a good look and couldnt tell. Any idea where the pilot filter is located? Is it the metal screw on filter on the back side of the tank?
  20. M

    Case 9050b: help bringing it back to life

    Hi everyone! just joined here, all of my google searches have always led here when I was checking things out so time to join and ask the pros! A little about me: I am a mechanic by trade but most of my time has been on light duty applications. I am only vaguely familiar with the theory of...
Top