• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. southernman13

    Amarekan King Kong brush grapple

    Didn’t see that!
  2. southernman13

    Amarekan King Kong brush grapple

    Saw one on a reels video pulling up mesquite bushes. Looked stout. Anyone have experience with these ? 96”. Doesn’t say what grade steel it’s made from. Idigtexas is the web site. They make it very difficult to find that out lol
  3. southernman13

    mini excavator information korean brand Hyundai

    I have a 60CR-9a. Love it! Plenty power smooth and stable. I don’t have much to compare it to. Only other mini I’ve spent any time on is a Kubota KX080-4 which is about 7K heavier and quite a bit more machine that’s obviously a much more capable machine. The Kubota is definitely better built and...
  4. southernman13

    Sidehill tipping point

    Like said until u roll over. Many variables but most of the time it’ll loose traction and slide down at an angle. I’ve never rolled one an hope I never do. I try to not get in that situation. Just running back and forth the grade can change. Will definitely pucker yo azz hehe
  5. southernman13

    210G warning symbols

    I went ahead and changed the fuel filters anyway. Couldn’t hurt not sure when they were last changed. Thanks
  6. southernman13

    210G warning symbols

    Must’ve been an electrical glitch. Never came back up. !
  7. southernman13

    210G warning symbols

    Had this come up. Shut it off waited a minute. Started back up ran fine no issues. Oil is good and no leaks. Didn’t run it long. Gonna go to lunch let it cool do more checking And never did change fuel filters the other day.
  8. southernman13

    210G warning symbols

    Had this come up. Shut it off waited a minute. Started back up ran fine no issues. Oil is good and no leaks. Didn’t run it long. Gonna go to lunch let it cool do more checking And never did change fuel filters the other day.
  9. southernman13

    210G rpm

    Awesome. Thanks MG!
  10. southernman13

    210G rpm

    It’s on pwr. I knew I should’ve clarified that up front lol
  11. southernman13

    210G rpm

    New to me. Runs great. Changed out fuel line from filters to engine it had a slight leak. Have not changed the fuel filters yet. I wanted to let the fuel level get lower. I was gonna change them but didn’t seem like it was gonna quit flowing from the water bleed screw on bottom of filter so I...
  12. southernman13

    Kubota 97-3

    Tenfo thanks
  13. southernman13

    Kubota 97-3

    Tenfo thanks
  14. southernman13

    Kubota 97-3

    Do they have a better ac filtration system. My biggest complaint other than that I’ve had good service. And why can’t they make a blower in the cab that has more force. I know it’s reduced when the system clogs up but even brand new it’s not impressive
  15. southernman13

    Kobelco hydraulic excavators

    I had a John Deere 200c had same symptoms. Mine was bad hydraulic pump
  16. southernman13

    210g front window

    Finally got it in enough light my blind ass could see it hehe. Was a simple stainless C shaped piece of wire I had to fish out with a very small o ring pic. Easy peazey
  17. southernman13

    210g front window

    No sir I wish that’d be to easy lol. You can’t see anything. Only the end of the shaft is visible. On the new frame there is a groove cut in it like for c clip but it’s not tht deep. I can slightly see a shiny piece of wire in there. It must be a wire type clip of some sort. I can’t get anything...
  18. southernman13

    210g front window

    Bought a 210g. 12’ model w broken window and bent frame. Got it all together but I see now the little rollers in the corners that it slides up and back on have some type of spring that holds the roller on. That’s what it’s called in the parts diagram. I see no way to get it off lol. Anyone ever...
  19. southernman13

    CAT 299D3XE roll over

    Yes WD same experience I’ve had all the way around. I have one trailer I won’t back down without an implement attached but I have hehe. I’ll back it on and drive it off if it’s a bare machine lol. First time I saw my son break over a super steep hill with a bucket full of rip rap I bout ****...
  20. southernman13

    CAT 299D3XE roll over

    As long as u have an implement on it it’ll go down probably more than you’re willing to. We have a 97-2 Kubota basically what u have and I’ve unloaded it from some very steep angles off the trailer. Even without a bucket and that’s scary. Real close to scraping the back of the machine on the...
Top