• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. dmitry_bulldozerman

    140H transmission ECU test

    Considering that you repaired the ECM yourself, such repairs usually do not last long. In any case, first you need to connect CAT ET and look at the speed switch parameters and the solenoids' activation status.
  2. dmitry_bulldozerman

    Cat 311 left final drive.

    Was the rear pump more worn than the front? I hope your excavator is now running straight?
  3. dmitry_bulldozerman

    ‘95 Cat307 graymarket track adjuster

    Addition
  4. dmitry_bulldozerman

    ‘95 Cat307 graymarket track adjuster

    Your Japanese market excavator 9ZL02090 is equivalent to excavator 307_2PM1-256, so the instructions from 2PM apply. You do not need to remove the track, you need to remove the track roller under the tensioner. See the manual attached.
  5. dmitry_bulldozerman

    ‘95 Cat307 graymarket track adjuster

    Hello. Please write the serial number of the excavator.
  6. dmitry_bulldozerman

    CAT 336E aftertreatment

    Hi. 336E L EXCAVATOR YCE00540 (Build Date - 26/03/2013) Try using the trouble code and two diagnostic message troubleshooting instructions.
  7. dmitry_bulldozerman

    320D and 330D Flash

    The question is closed. I have the flash files.
  8. dmitry_bulldozerman

    320D and 330D Flash

    OK, if no one can provide flash files, then it is not necessary. If possible, then please provide a list of current flash files for these machines from the Service Software Files website. If possible, with a history of flash file replacement.
  9. dmitry_bulldozerman

    Cat 313gc Fault code 1192-7

    I'm 99% sure that the water presence sensor wire was simply torn off.
  10. dmitry_bulldozerman

    D4g dash switch

    №8 146-6371 Louver AS 4 pieces
  11. dmitry_bulldozerman

    D4g dash switch

    Your bulldozer has a plug. But you can optionally connect an additional light button. №9 165-0311 Pluge
  12. dmitry_bulldozerman

    D4g dash switch

    Please enter the serial number or prefix of the machine.
  13. dmitry_bulldozerman

    M317D_CA6

    Does anyone have instructions on how to fix these codes? M317D_CA6
  14. dmitry_bulldozerman

    Cat 313gc Fault code 1192-7

    Hi. These are different codes. You need to take a photo of your monitor with these two codes, what they look like. preliminary information on codes 97-3 Water In Fuel Indicator : Voltage Above Normal 1192–7 Main Implement Valve: Mechanical System Not Responding Properly Solenoid Valve - Test
  15. dmitry_bulldozerman

    320D and 330D Flash

    Hello everyone. Can I have a set of flash files for machines CXY00340 and NBD01078? And also the history of flash file replacement Thanks in advance.
  16. dmitry_bulldozerman

    Cat 311 left final drive.

    Not exactly. In Straight Travel mode, there is no full summation of flows from two pumps. In Straight Travel mode, both travel hydraulic motors receive oil through the Straight Travel Valve mainly from the rear pump. It is the Straight Travel Valve that allows for equal distribution of oil...
  17. dmitry_bulldozerman

    How much air pressure to run in 29.5x29 cat 988 bias tires?

    Yes, but MattR wanted to hear an objective opinion from everyone.
  18. dmitry_bulldozerman

    How much air pressure to run in 29.5x29 cat 988 bias tires?

    Yes, I read it, but my post with this instruction was much earlier than yours. And we still haven't heard what is written on the sidewalls of MattR's tires.
  19. dmitry_bulldozerman

    How much air pressure to run in 29.5x29 cat 988 bias tires?

    I think that if you follow this comic book instruction, everything will be fine)))
  20. dmitry_bulldozerman

    How much air pressure to run in 29.5x29 cat 988 bias tires?

    All the instructions may be useless if he has tires that say, for example, "Maximum pressure 45 psi")))
Top