• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Rogerdoger

  1. Rogerdoger

    420ct series 3 injectors

    And 10hrs latter the turbo failed
  2. Rogerdoger

    420ct series 3 injectors

    It ended up being the injection pump
  3. Rogerdoger

    420ct series 3 injectors

    Injection pump had to be re-built
  4. Rogerdoger

    2008 420CT

    Ended up being the injection pump
  5. Rogerdoger

    2008 420CT

    Any good advice on testing turbo or injection pump?
  6. Rogerdoger

    2008 420CT

    Does anyone know what pressure I should have for fuel?
  7. Rogerdoger

    2008 420CT

    It’s possible, I pulled the the cold side of the turbo, everything looked fine and no play. The injection pump I am trying to leave as last possible resort.
  8. Rogerdoger

    2008 420CT

    Well it wasn’t that lift pump. What fuel pressure should this have at a idle and running wide open
  9. Rogerdoger

    420ct series 3 injectors

    Changed fuel filters, tested injectors, air filter, and inspected turbo. Tomorrow I plan to plumb in a fuel pressure gauge and see what happens. I have only had the loader for a few months and it’s had this problem since I bought it.
  10. Rogerdoger

    420ct series 3 injectors

    Injectors we’re fine
  11. Rogerdoger

    420ct series 3 injectors

    1500hrs, getting them tested tomorrow. I think I have a could injector, loss of power under heavy load.
  12. Rogerdoger

    420ct series 3 injectors

    Never mind took a bigger side hammer
  13. Rogerdoger

    420ct series 3 injectors

    I have tried using slide hammer while the engine is warm with no luck, I have been soaking the injectors for a few days but they still won’t budge.
  14. Rogerdoger

    420ct series 3 injectors

    Anyone have any advice on pulling the injectors on a 420ct series loader? I have tried everything I can think of but I just can’t get them to budge!
  15. Rogerdoger

    Ride control

    2008 420ct series 3 with HControls. On the right hand control I see the button for ride control but not sure that it is doing anything. Is there some notification or light letting me know it’s on or off?
See more
Top