• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by chris_pops

  1. C

    Case 1845c won’t stay running

    The machine fired right up and ran till I shut it off 30min later. I assume the wire that slipped off the spade must be something to do with the cold start solenoid then? And when it grounded on the rail it stole voltage from the shutoff solinoid and shut the machine down. All is well now thanks...
  2. C

    Case 1845c won’t stay running

    So here’s what I’m working with. I found the other end of the wire circled in blue,below the wire there are two spades one of which has nothing connected (blue arrow) which is where I believe the wire slipped off of, then the red arrow has a single black wire going to it but I couldn’t get a...
  3. C

    Case 1845c won’t stay running

    Thanks for the responses. I’ll be working on this machine again within the next few days I’ll let you know how I make out. -Chris
  4. C

    Case 1845c won’t stay running

    Evening everyone, Home your all having a good thanksgiving. This is my first post here hopefully someone can help me. I’m working on an 1845c the machine starts right up runs for about 45 seconds then shuts off starts right back up but turns off within a few seconds. Battery connections are...
See more
Top