tool_king
Senior Member
Manual emailed
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Hitachi EX75UR-3 fault code
- Thread starter Loadall526
- Start date
joelx777
Well-Known Member
tool_king - would it be possible for you to send me the repair and parts manual for a John Deere 490e excavator? My email is [email protected]
DAGP
New Member
Could anybody help me with a E11 fault code on a Hitachi Ex135UR-5 ?
Could it be associated with an E51 fault code, I know the arm to dipper sensor is not operating correctly
Could it be associated with an E51 fault code, I know the arm to dipper sensor is not operating correctly
Matthieu149
Member
Hi everyone,
I am from Canada, I just bought a used gray market 1996 HITACHI EX75UR-3 excavator with all label in Japanese!
I am looking for any useful operator or repair manual about it.
If there is somebody here that could send it to me, that would be greatly appreciated!
Thank you very much. Here is my e-mail address : [email protected].
I am from Canada, I just bought a used gray market 1996 HITACHI EX75UR-3 excavator with all label in Japanese!
I am looking for any useful operator or repair manual about it.
If there is somebody here that could send it to me, that would be greatly appreciated!
Thank you very much. Here is my e-mail address : [email protected].
tool_king
Senior Member
Being sent to you
Eastwood
New Member
Me too Please [email protected]
Hi tool_king is there any chance of getting a copy from anyone of the manual as I am experiencing these problem too. I know this is a while back now . I am hoping 1 of you guys will be on to see this .. thanks
[email protected]
[email protected]
tool_king
Senior Member
Email sent
Hi tool_king is there any chance to get a copy of the troubleshooting guide from anyone
we have error 042.
thank you.
additionally, scales are installed.
there is an electrical circuit, but it does not have a scale circuit and a hydraulic circuit.
[email protected]
we have error 042.
thank you.
additionally, scales are installed.
there is an electrical circuit, but it does not have a scale circuit and a hydraulic circuit.
[email protected]
Hi, I have the same machine and its got the same problem, did you figure out what was wrong with it?
superbike47
New Member
Hello,
I have se same problem that you "042". Are you fond a solution ?
Could i have the a copy by email please : [email protected].
Thank's a lot
I have se same problem that you "042". Are you fond a solution ?
Could i have the a copy by email please : [email protected].
Thank's a lot
Proszę o kopię
[email protected]
[email protected]
Matthieu149
Member
e-mail sent!
Hi ,
I’m having an e52 error on a ex75UR-3 , would it be possible to have the manual sent on to me please really struggling to have the problem sorted!
Thanks in advance!
[email protected]
I’m having an e52 error on a ex75UR-3 , would it be possible to have the manual sent on to me please really struggling to have the problem sorted!
Thanks in advance!
[email protected]
tool_king
Senior Member
Emailed to you .