Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page.
We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy.
Thank you!
After having issue with the load cell, I new on was installed but it will not take the calibration no matter how many times we have tried to. Would the 7617 error prevent the machine from starting?
This is the service manual for you machine. The error code is due to the sensor not being calibrated. I have had issues that required Genie software to correct during calibrations. Unfortunately I don’t have much to offer but you can check the blink codes under the platform control board and see if something else is popping up.
Thank you so much for that information. It was only that code about it needing calibration. Guess we will need the software as well cause doing it as per the manual, we are not hearing the beep it says it needs to make.