• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by SL Construction

  1. SL Construction

    Well, I done did it...Amulet Hoeclamp on my NH 675E W/Extend-A-Hoe

    Swetz, Thanks. It looks like this will work for me then. I sent an email to Amulet for a quote, so we'll see what happens. Thanks again!
  2. SL Construction

    Well, I done did it...Amulet Hoeclamp on my NH 675E W/Extend-A-Hoe

    Necro-post revival alert! I'm considering one of these for my LB75 and am wondering how the thing has worked for you over the last 3 years? I recently bought a portable sawmill and wonder how it will work on logs?
  3. SL Construction

    LB75 won't start???

    Hey All, Thanks for the help. I ended up replacing the positive cable this morning and she fired up. Hopefully that ends this saga and I can continue trying to figure out what's up with the 4wd electrics. Thanks again!
  4. SL Construction

    LB75 won't start???

    Swetz, Thanks for that video. Definitely helped. I tested a bunch (my brother helped hold the leads as he was here painting doors for me). Battery was at 12.6 volts. No appreciable difference in any of the connections. When the key was turned, the ground side between the battery and the starter...
  5. SL Construction

    LB75 won't start???

    Pulled the positive lead off and used the jumper cable (pain to get in in past the frame) and left the negative lead connected and jumped the negative to the starter body and it cranked albeit slowly. Battery side got pretty hot on the positive. Reconnected the positive lead and left the...
  6. SL Construction

    LB75 won't start???

    Hey All, My 2000 LB75 was slow starting so I replaced the battery back in April. It started fine the few times I used it. I parked it and then when I went to use it recently, it would just click at the starter. I charged the battery, same thing. Replaced the starter, same thing. Tested the...
  7. SL Construction

    LB75 4x4 fuse keeps blowing

    Thanks. I'll give that a look. I had that all apart when I had to do the forward/reverse actuators a couple of years ago.
  8. SL Construction

    Battery Powered Grease Gun

    I have two old Lincolns but the batteries are shot. Was thinking of getting the Makita aas I have all Makita cordless tools as well. I did see replacement Lincoln batteries on Amazon but was wondering about their quality?
  9. SL Construction

    LB75 4x4 fuse keeps blowing

    Hey All, I keep blowing the 7.5 amp fuse on the 4x4 on my 2001 LB75. Any thoughts on why? It will last for a bit, then nothing. Thanks,
  10. SL Construction

    NH LB75 Shuttle not moving forward

    Finally got a chance to work on it today (too hot to do anything else) after it wouldn't move forward at all yesterday. Pulled the directional control valve on the top of the trans and figured I would service it per the manual. Solenoids have 5 ohm resistance as they should which I assume means...
  11. SL Construction

    NH LB75 Shuttle not moving forward

    Hey All, My '01 LB75 won't go forward after it runs for a bit. I thought initially it was a bad relay, but now I'm not sure. Anyone have any troubleshooting advice? Thanks,
  12. SL Construction

    JLG 450A Electrical problem

    Well I had some time tonight to mess with it more and ended up jumping across the starter and it started right up. I'm really beginning to believe the hot lead has a bad end on it as I still had to keep wiggling it around to make contact. Seems weird that I keep having to do that.
  13. SL Construction

    JLG 450A Electrical problem

    So I cleaned the terminals on both solenoids and still nothing. I had help and the loud click is at the starter. Once it clicks I have to remove the hot lead on the battery for it to re-energize the system again. Also inside the control box on the upper left side there is what I believe a relay...
  14. SL Construction

    JLG 450A Electrical problem

    I was thinking that too, but cleaned the ones I could reach. Maybe it is the starter? I just realized that I had the parts manual downloaded and there's a circuit breaker on the hot lead going to the control panel. Maybe it's that?
  15. SL Construction

    JLG 450A Electrical problem

    No idea as it won't start. Battery was fully charged and even tried it with boost of my battery charger. It just makes one loud click then zip.
See more
Top